Specification Grade Sheet Rubber
- Military Specification
- ASTM D 2000 Specifcation
- Aerospace Material Specification
Specification Grade Sheet Rubber Products
Jump to Navigation
Military Specification Sheet Rubber Products
MIL-R-3065D SC (Neoprene)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-3065D SC 310 F2 |
30 | 1/32 - 1/4 | 36, 48 | 1500 | 550 | -60°F to +220°F | 2.39 lb |
| MIL-R-3065D SC 410 F2 |
40 | 1/64 - 1/4 | 36, 48 | 1500 | 500 | -60°F to +220°F | 2.47 lb |
| MIL-R-3065D SC 515 F2 |
50 | 1/64 - 1/4 | 36, 48 | 1700 | 400 | -60°F to +220°F | 2.61 lb |
| MIL-R-3065D SC 615 F2 |
60 | 1/64 - 1/4 | 36, 48 | 1800 | 350 | -60°F to +220°F | 2.65 lb |
| MIL-R-3065D SC 715 F2 |
70 | 1/64 - 1/4 | 36, 48 | 1800 | 270 | -60°F to +220°F | 2.61 lb |
| MIL-R-3065D SC 815 F2 |
80 | 1/64 - 1/4 | 36, 48 | 1600 | 150 | -60°F to +220°F | 2.61 lb |
*Physicals presented are typical values.
MIL-R-3065D SB (Nitrile)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-3065D SB 410 F2 |
40 | 1/64 - 1/4 | 36, 48 | 1200 | 550 | -60°F to +220°F | 2.22 lb |
| MIL-R-3065D SB 515 F2 |
50 | 1/64 - 1/4 | 36, 48 | 1600 | 450 | -60°F to +220°F | 2.22 lb |
| MIL-R-3065D SB 615 F2 |
60 | 1/64 - 1/4 | 36, 48 | 1600 | 350 | -60°F to +220°F | 2.28 lb |
| MIL-R-3065D SB 715 F2 |
70 | 1/64 - 1/4 | 36, 48 | 2000 | 280 | -60°F to +220°F | 2.35 lb |
| MIL-R-3065D SB 815 F1 |
80 | 1/64 - 1/4 | 36, 48 | 1800 | 200 | -60°F to +220°F | 2.45 lb |
*Physicals presented are typical values.
MIL-R-6855 Class 1 (Fuel Resistant Nitrile)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-6855 Class 1 Grade 40 |
40 | 1/64 - 1/4 | 36, 48 | 1500 | 600 | -50°F to +220°F | 2.15 lb |
| MIL-R-6855 Class 1 Grade 50 |
50 | 1/64 - 1/4 | 36, 48 | 1800 | 550 | -50°F to +220°F | 2.38 lb |
| MIL-R-6855 Class 1 Grade 60 |
60 | 1/64 - 1/4 | 36, 48 | 2100 | 500 | -50°F to +220°F | 2.42 lb |
| MIL-R-6855 Class 1 Grade 70 |
70 | 1/64 - 1/4 | 36, 48 | 2000 | 300 | -50°F to +220°F | 2.5 lb |
| MIL-R-6855 Class 1 Grade 80 |
80 | 1/64 - 1/4 | 36, 48 | 1800 | 200 | -50°F to +220°F | 2.46 lb |
*Physicals presented are typical values.
MIL-R-6855 Class 2 (Oil Resistant Neoprene)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-6855 Class 2 Grade 30 |
30 | 1/64 - 1/4 | 36, 48 | 1300 | 550 | -50°F to +220°F | 2.36 lb |
| MIL-R-6855 Class 2 Grade 40 |
40 | 1/64 - 1/4 | 36, 48 | 1600 | 550 | -50°F to +220°F | 2.45 lb |
| MIL-R-6855 Class 2 Grade 50 |
50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -50°F to +220°F | 2.53 lb |
| MIL-R-6855 Class 2 Grade 60 |
60 | 1/64 - 1/4 | 36, 48 | 1900 | 400 | -50°F to +220°F | 2.69 lb |
| MIL-R-6855 Class 2 Grade 70 |
70 | 1/64 - 1/4 | 36, 48 | 1800 | 250 | -50°F to +220°F | 2.67 lb |
| MIL-R-6855 Class 2 Grade 80 |
80 | 1/64 - 1/4 | 36, 48 | 1800 | 160 | -50°F to +220°F | 2.78 lb |
*Physicals presented are typical values.
MIL-G-1149
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-G-1149 Type 1 Class 1 Grade 50 Neoprene |
50 | 1/64 - 1/4 | 36, 48 | 1300 | 400 | -30°F to +200°F | 2.67 lb |
| MIL-G-1149 Type 1 Class 2 Grade 50 SBR |
50 | 1/16 - 1/4 | 36 | 1100 | 400 | -40°F to +180°F | 2.14 lb |
| MIL-G-1149 Type 1 Class 5 Grade 50 Nitrile |
50 | 1/64 - 1/4 | 36, 48 | 1500 | 500 | -40°F to +220°F | 2.32 lb |
*Physicals presented are typical values.
MIL-R-2765 (Nitrile)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-2765 | 40 | 1/64 - 1/4 | 36, 48 | 1300 | 500 | -50°F to +220°F | 2.24 lb |
*Physicals presented are typical values.
MIL-R-21252 (EPDM)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-21252 | 85 | 1/64 - 1/4 | 36, 48 | 2000 | 200 | -40°F to +220°F | 2.3 lb |
*Physicals presented are typical values.
MIL-R-83285 GR80 (EPDM)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-83285 GR80 |
80 | 1/64 - 1/4 | 36, 48 | 1800 | 150 | -60°F to +300°F | 2.32 lb |
*Physicals presented are typical values.
MIL-R-900 (EPDM)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| MIL-R-900 | 45 | 1/64 - 1/4 | 36, 48 | 1500 | 550 | -40°F to +220°F | 2.1 lb |
*Physicals presented are typical values.
ASTM D 2000 Specification Sheet Rubber Products
M4CA (EPDM), also meets M4AA and M2AA requirements
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| ASTM D 2000 M4CA 410 A25 B35 EA14 F19 |
40 | 1/64 - 1/4 | 36, 48 | 1500 | 550 | -55°F to +300°F | 2.1 lb |
| ASTM D 2000 M4CA 510 A25 B35 EA14 F19 |
50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -55°F to +300°F | 2.08 lb |
| ASTM D 2000 M4CA 610 A25 B35 EA14 F19 |
60 | 1/64 - 1/4 | 36, 48 | 1800 | 350 | -55°F to +300°F | 2.14 lb |
| ASTM D 2000 M4CA 710 A25 B35 EA14 F19 |
70 | 1/64 - 1/4 | 36, 48 | 1700 | 250 | -55°F to +300°F | 2.2 lb |
| ASTM D 2000 M4CA 810 A25 B35 EA14 F19 |
80 | 1/64 - 1/4 | 36, 48 | 1800 | 200 | -55°F to +300°F | 2.31 lb |
*Physicals presented are typical values.
M2BC (Neoprene)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| ASTM D 2000 M2BC 410 A14 B14 C12 E034 F17 |
40 | 1/64 - 1/4 | 36, 48 | 1600 | 550 | -50°F to +200°F | 2.45 lb |
| ASTM D 2000 M2BC 510 A14 B14 C12 E034 F17 |
50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -50°F to +200°F | 2.53 lb |
| ASTM D 2000 M2BC 610 A14 B14 C12 E034 F17 |
60 | 1/64 - 1/4 | 36, 48 | 1900 | 400 | -50°F to +200°F | 2.69 lb |
| ASTM D 2000 M2BC 710 A14 B14 C12 E034 F17 |
70 | 1/64 - 1/4 | 36, 48 | 1800 | 250 | -50°F to +200°F | 2.67 lb |
*Physicals presented are typical values.
M5BG (Nitrile)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| ASTM D 2000 M5BG 407 A14 B14 E014 E034 F17 |
40 | 1/64 - 1/4 | 36, 48 | 1100 | 500 | -40°F to +220°F | 2.14 lb |
| ASTM D 2000 M5BG 507 A14 B14 E014 E034 F17 |
50 | 1/64 - 1/4 | 36, 48 | 1200 | 400 | -40°F to +220°F | 2.22 lb |
| ASTM D 2000 M5BG 610 A14 B14 E014 E034 F17 |
60 | 1/64 - 1/4 | 36, 48 | 1700 | 400 | -40°F to +220°F | 2.41 lb |
| ASTM D 2000 M5BG 710 A14 B14 E014 E034 F17 |
70 | 1/64 - 1/4 | 36, 48 | 1700 | 300 | -40°F to +220°F | 2.41 lb |
*Physicals presented are typical values.
Aerospace Material Specification Sheet Rubber Products
Aerospace Material Specification (AMS)
Finish: Smooth
| Specification | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| AMS 3205 Low Temperature (Neoprene) |
50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -50°F to +220°F | 2.53 lb |
| AMS 3208 Weather Resistant (Neoprene) |
50 | 1/64 - 1/4 | 36, 48 | 1800 | 400 | -30°F to +220°F | 2.51 lb |
| AMS 3215 Fuel Resistant (Nitrile) |
70 | 1/64 - 1/4 | 36, 48 | 1700 | 350 | -30°F to +220°F | 2.45 lb |
*Physicals presented are typical values.
