SBR is a copolymer of styrene and butadiene and has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength. The temperature range of SBR is -40˚F to 180˚F. SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.
A premium grade SBR sheet with a high tensile strength. Well suited for the heating and plumbing trades. Has good aging, abrasion and tear resistant properties. Refer to physical properties and ASTM data in assessing suitability for intended applications. Black in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 75 | 1/16 - 1/4 | 36, 48 | 900 | 160 | -40°F to +180°F | 2.56 lb | ASTM D 2000 1AA 709Z† |
*Physicals presented are typical values.
†Z = 75 ± 5 Durometer
A mid-grade SBR with a higher tensile and better aging capacity than the economical Red Rubber. Red in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 75 | 1/16 - 1/4 | 36, 48 & 72 |
700 | 250 | -20°F to +170°F | 3.2 lb | ASTM D 1330 Grade 1 |
An economical red sheet for use in low pressure applications with no oil resistant requirements.
Red in color. Also available in Black on a special order basis.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 75 | 1/32 - 1/4 | 36, 48 & 72 |
400 | 150 | -40°F to +170°F | 3.5 lb | ASTM D 1330 Grade 2 ASTM D 2000 1 AA 704Z† |
*Physicals presented are typical values.
†Z = 75 ± 5 Durometer
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
