Nitrile is the polymer of choice for applications requiring oil and solvent resistance. Nitrile has very good oil and gasoline resistance, superior resistance to petroleum-based hydraulic fluids, a wide range of service temperatures, good resistance to hydrocarbon solvents, and very good resistance to alkalis and acids.
A Nitrile material designed specifically for the transformer oil market; helping to dissipate the likelihood of high electrostatic charging tendencies. These highly engineered materials, in addition to meeting their respective ASTM D 2000 line call-outs, meet industry specification GE A12C11E7.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 60 | 1/32 - 1/2 | 36, 48 | 2100 | 500 | -30°F to +250°F | 2.36 lb | ASTM D 2000 5BG 620 A14 B14 EO34; General Electric EA12C11E7 |
| 70 | 1/32 - 1/2 | 36, 48 | 2200 | 350 | -20°F to +250°F | 2.42 lb | ASTM D 2000 5BG 720 A14 B14 EO34; General Electric EA12C11E7 |
Specially designed and developed for use in environments where alternative fuels are present. Immersion test results indicate that these materials are compatible with alternative fuels and are suitable for Bio-Diesel B20 (20% Bio–Diesel and 80% Petroleum Diesel) and Bio–Diesel B100 (100% Bio–Diesel).
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 60 | 1/32 - 1/2 | 36, 48 | 1500 | 300 | -30°F to +220°F | 2.39 lb | Compatible with Bio-Diesel B20 & B100 |
| 70 | 1/32 - 1/2 | 36, 48 | 1800 | 250 | -20°F to +220°F | 2.4 lb | Compatible with Bio-Diesel B20 & B100 |
High Grade Nitrile is formulated to give maximum oil resistance. The higher cost is offset by longer service life in demanding applications. This is a warehouse stock item in 60 durometer. Other hardnesses are available on a made-to-order basis.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 1100 | 500 | -30°F to +225°F | 2.22 lb | ASTM D 2000 6BG 410 A14 B14 |
| 50 | 1/64 - 1/4 | 36, 48 | 1400 | 400 | -30°F to +225°F | 2.32 lb | ASTM D 2000 6BG 512 A14 B14 |
| 60 | 1/64 - 1/4 | 36, 48 | 1600 | 300 | -30°F to +225°F | 2.36 lb | ASTM D 2000 6BG 615 A14 B14 |
| 70 | 1/64 - 1/4 | 36, 48 | 1700 | 250 | -30°F to +225°F | 2.48 lb | ASTM D 2000 6BG 715 A14 B14 |
| 80 | 1/64 - 1/4 | 36, 48 | 1600 | 150 | -30°F to +225°F | 2.59 lb | ASTM D 2000 6BG 815 A14 B14 |
| 90 | 1/32 - 1/4** | 36, 48 | 1600 | 100 | -30°F to +225°F | 2.34 lb | ASTM D 2000 6BG 915 A14 B14 |
A quality grade blended sheet for applications requiring a higher percentage of Nitrile. This formulation provides greater oil and solvent resistance and has a wider temperature range than commercial Nitrile.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 900 | 450 | -30°F to +200°F | 2.15 lb | ASTM D 2000 1BC 408 |
| 50 | 1/32 - 1/4 | 36, 48 | 1100 | 400 | -30°F to +200°F | 2.32 lb | ASTM D 2000 1BC 510 |
| 60 | 1/32 - 1/4 | 36, 48 | 1200 | 300 | -30°F to +200°F | 2.46 lb | ASTM D 2000 1BC 610 |
| 70 | 1/32 - 1/4 | 36, 48 | 1200 | 250 | -30°F to +200°F | 2.47 lb | ASTM D 2000 1BC 710 |
| 80 | 1/32 - 1/4 | 36, 48 | 1200 | 150 | -30°F to +200°F | 2.52 lb | ASTM D 2000 1BC 810 |
A smooth finish blended Nitrile sheet, which is offered in a range of five durometers: 40 thru 80 durometer, in order to perform in a wide variety of applications. Designed to meet ASTM specifications for 1BF material.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/16 - 1 | 36, 48 | 800 | 350 | -20°F to +170°F | 2.5 lb | ASTM D 2000 SAE J200 1BF 408Z † |
| 50 | 1/32 - 1 | 36, 48 | 800 | 300 | -20°F to +170°F | 2.6 lb | ASTM D 2000 SAE J200 1BF 508Z † |
| 60 | 1/32 - 1 | 36, 48 | 900 | 200 | -20°F to +170°F | 2.6 lb | ASTM D 2000 SAE J200 1BF 4609 |
| 70 | 1/32 - 1 | 36, 48 | 1000 | 200 | -20°F to +170°F | 2.7 lb | ASTM D 2000 SAE J200 1BF 710 |
| 80 | 1/32 - 1 | 36 | 1000 | 100 | -20°F to +170°F | 2.6 lb | ASTM D 2000 SAE J200 1BF 810 |
As its name implies, this material is specially formulated for its whiteness and is used extensively in food and pharmaceutical environments. It is formulated with FDA-approved ingredients. It is non-toxic, non-marking and non-allergenic. It exhibits good abrasion resistance and handles oily and greasy food products well. All materials are made with FDA approved ingredients per 21CFR 177.2600. White in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 45 | 1/32 - 1/2 | 36, 48 | 750 | 550 | -30°F to +225°F | 2.71 lb | ASTM D 2000 1BG 505Z † |
| 55 | 1/32 - 1/2 | 36, 48 | 1200 | 500 | -30°F to +225°F | 2.75 lb | ASTM D 2000 1BG 610Z † |
| 65 | 1/32 - 1/2 | 36, 48 | 1400 | 450 | -30°F to +225°F | 2.95 lb | ASTM D 2000 1BG 712Z † |
| 80 | 1/32 - 1/2 | 36, 48 | 900 | 300 | -30°F to +225°F | 3.31 lb | ASTM D 2000 1BG 808Z † |
A sheet specially formulated for its whiteness, used in food, phamaceutical, and cosmetic processing. Made from FDA-approved ingredients per 21CFR 177.2600, it is non-toxic, non-marking, and non-allergenic. It has good oil and abrasion resistance and handles oily and greasy food products well. This product conforms with 3-A Sanitary 18-03 requirements for multiple use rubber Class III and Class IV. White in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 60 | 1/16 - 1/4 | 36, 48 | 1000 | 500 | -25°F to +180°F | 2.8 lb | ASTM D 2000 1BG 610 |
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
