Neoprene is noted for a unique combination of properties, which has led to its use in thousands of applications in diverse environments. Neoprene is a polymer that provides moderate oil and gasoline resistance, very good resistance to ozone and sunlight, excellent adhesion to fabric and metals, good resistance to abrasion and flex cracking and very good resistance to alkalis and acids.
This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles that are intended to be used in contact with food.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 800 | 550 | -30°F to +220°F | 2.65 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
| 55 | 1/32 - 1/4 | 36, 48 | 1200 | 500 | -30°F to +220°F | 2.98 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
| 60 | 1/32 - 1/4 | 36, 48 | 1400 | 450 | -30°F to +220°F | 2.98 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
This specially formulated sheet product line prevents the growth of bacteria, fungi, and yeasts while avoiding obstacles that organic biocides have posed in the past. This product can alleviate cleaning challenges in food-processing, medical, industrial, and other applications prone to microbial growth.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36 | 1600 | 550 | -50°F to +220°F | 2.44 lb | MIL-R-6855 CL2 GR40 MIL STD 810E Method 508.4 |
| 50 | 1/32 - 1/4 | 36 | 1200 | 500 | -30°F to +220°F | 2.98 lb | MIL-R-6855 CL2 GR40 NIL STD 810E Method 508.4 |
| 60 | 1/32 - 1/4 | 36 | 1400 | 450 | -30°F to +220°F | 2.98 lb | ASTM D 2000 2BC 615 A14 B14 C12 Z (Z = MIL STD 810E Method 508.4) |
A blended Neoprene compound with one or more polyester fabric plies, for service where dimensional stability is required. Suitable for use where moderate oil resistance is required and where hot and cold water and gases are being conveyed. Fabric content per thickness is one ply for 1/32” and 1/16”, two plies for 1/8”, three plies for 3/16”, and four plies for 1/4”.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile PSI |
Ultimate Elongation Percent |
Fabric Weight |
Fabric Type |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Oil Resistance |
Specifications |
|---|---|---|---|---|---|---|---|---|---|---|
| 70† | 1/16 - 1/4 | 36, 48 | 1,000 | n/a | 4 oz | Cotton or Polyester |
-30°F to +200°F |
2.5 lb | Good | ASTM D 2000 2AA 710 A13 |
*Physicals presented are typical values.
† Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.
GAUGES: This construction includes one ply for each 1/16” thickness:
1/16 - 3/32 = 1 ply; 1/8” = 2 plies; 3/16” = 3 plies; 1/4” = 4 plies
Specifically designed for use with pressure sensitive adhesives (PSA). We supply the material talc-free: re-rolled in a polyethylene liner.
Finish: Matte Finish on one side
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 900 | 400 | -30°F to +200°F | 2.3 lb | ASTM D 2000 SAE J200 1BC 408 MIL-R-3065 SC 408 |
| 50 | 1/32 - 1/4 | 36 | 1100 | 350 | -30°F to +200°F | 2.6 lb | ASTM D 200 SAE J200 1BC 510 MIL-R-3065 SC 510 |
| 60 | 1/32 - 1/4 | 36, 72 | 1200 | 350 | -30°F to +200°F | 2.7 lb | ASTM D 2000 SAE J200 1BC 610 MIL-R-3065 SC 610 |
| 70 | 1/32 - 1/4 | 36 | 1200 | 250 | -30°F to +200°F | 2.7 lb | ASTM D 200 SAE J200 1BC 710 MIL-R-3065 SC 710 |
| 80 | 1/32 - 1/4 | 36 | 1200 | 150 | -30°F to +200°F | 2.8 lb | ASTM D 2000 SAE J200 1BC 810 MIL-R-3065 SC 810 |
*Physicals presented are typical values.
Another example of the extensive capabilities of our laboratory. This material is designed and formulated to meet the mass transit industry’s most demanding requirements and specifications for smoke generation (ASTM E 662), flame propogation (ASTM C 542), and toxic fume production (SMP 800-C). Rail transit, truck, bus or automotive, WARCO BILTRITE has the material to meet your requirements.
Finish: Nylon
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 65 | 1/32 - 1/4 | 36, 48 | 1500 | 500 | -30°F to +220°F | 2.98 lb | ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure), Bombardier SMP 800-C† Boeing BSS 7239, UL 94VO |
| 75 | 1/32 - 1/4 | 36, 48 | 1300 | 550 | -30°F to +220°F | 3.12 lb | ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure), Bombardier SMP 800-C† Boeing BSS 7239, UL 94VO |
*Physicals presented are typical values.
This product is designed to give maximum performance and service, resisting degradation from ozone and performing well in contact with oils and many chemicals, exhibiting integrity over a wide temperature range as well as an outstanding resistance to damage caused by flexing and twisting.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 30 | 1/32 - 1/4 | 36, 48 | 400 | 450 | -30°F to +225°F | 2.43 lb | ASTM D 2000 2BC 308 A14 C12 EO34 |
| 40 | 1/64 - 1/4 | 36, 48 | 1200 | 450 | -30°F to +225°F | 2.46 lb | ASTM D 2000 2BC 410 A14 C12 EO34 |
| 50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -30°F to +225°F | 2.54 lb | ASTM D 2000 2BC 515 A14 C12 EO34 |
| 60 | 1/64 - 1/4 | 36, 48 | 1600 | 350 | -30°F to +225°F | 2.65 lb | ASTM D 2000 2BC 615 A14 C12 EO34 |
| 70 | 1/64 - 1/4 | 36, 48 | 1600 | 250 | -30°F to +225°F | 2.77 lb | ASTM D 2000 2BC 715 A14 C12 EO34 |
| 80 | 1/64 - 1/4 | 36, 48 | 1600 | 150 | -30°F to +225°F | 2.79 lb | ASTM D 2000 2BC 815 A14 C12 EO34 |
| 90 | 1/32 - 1/4 | 36, 48 | 1600 | 150 | -30°F to +225°F | 2.81 lb | ASTM D 2000 2BC 915 A14 C12 EO34 |
A premium grade blended sheet for applications requiring a higher percentage of Neoprene and wider temperature range than standard commercial grade. This Neoprene formula has great resistance to weathering and moderate resisitance to oil and gasoline.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 30 | 1/32 - 1/4 | 36, 48 | 850 | 450 | -30°F to +200°F | 2.2 lb | ASTM D 2000 1BC 308 |
| 40 | 1/32 - 1/4 | 36, 48 | 1100 | 400 | -30°F to +200°F | 2.45 lb | ASTM D 2000 1BC 410 |
| 50 | 1/64 - 1/2 | 36, 48 | 1200 | 350 | -30°F to +200°F | 2.46 lb | ASTM D 2000 1BC 510 |
| 60 | 1/64 - 1/2 | 36, 48 | 1200 | 350 | -30°F to +200°F | 2.48 lb | ASTM D 2000 1BC 610 |
| 70 | 1/64 - 1/4 | 36, 48 | 1200 | 250 | -30°F to +200°F | 2.52 lb | ASTM D 2000 1BC 710 |
| 80 | 1/32 - 1/4 | 36, 48 | 1200 | 150 | -30°F to +200°F | 2.75 lb | ASTM D 2000 1BC 810 |
A smooth finish general purpose compound with low temperature flexibility and oil resistance. Resists rotting, checking, and cracking due to weather exposure. Designed to meet ASTM specifications for 1 BC Material.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1 | 36, 48 | 800 | 350 | -20°F to +170°F | 2.5 lb | ASTM D 2000 SAE J200 1BC 408 MIL R 3065 SC 408Z† |
| 50 | 1/32 - 2 | 36, 48 & 72 |
800 | 300 | -20°F to +170°F | 2.6 lb | ASTM D 2000 SAE J200 1BC 508 MIL R 3065 SC 508 |
| 60 | 1/32 - 2 | 36, 48 & 72 |
900 | 300 | -20°F to +170°F | 2.7 lb | ASTM D 2000 SAE J200 1BC 609 MIL R 3065 SC 609 |
| 70 | 1/32 - 2 | 36, 48 & 72 |
1000 | 200 | -20°F to +170°F | 2.7 lb | ASTM D 2000 SAE J200 1BC 710 MIL R 3065 SC 710 |
| 80 | 1/32 - 2 | 36, 48 & 72 |
1000 | 100 | -20°F to +170°F | 2.8 lb | ASTM D 2000 SAE J200 1BC 810 MIL R 3065 SC 810 |
A commercial blended neoprene sheet with a matte finish on one side. It is free of talc and release solutions which make it excellent for applications that involve the use of pressure sensitive adhesives (PSA). Black in color.
Finish: Matte Finish on One Side
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 50 | 1/16 - 1/4 | 36, 72 | 800 | 300 | -20°F to +170°F | 2.6 lb | ASTM D 2000 SAE J200 1BC 508 MIL R 3065 SC 508 |
| 60 | 1/64 - 1/2 | 36, 48 | 1200 | 350 | -30°F to +200°F | 2.48 lb | ASTM D 2000 SAE J200 1BC 609 MIL R 3065 SC 609 |
| 70 | 1/64 - 1/4 | 36, 48 | 1200 | 250 | -30°F to +200°F | 2.52 lb | ASTM D 2000 SAE J200 1BC 710 MIL R 3065 SC 710 |
| 80 | 1/32 - 1/4 | 36, 48 | 1200 | 150 | -30°F to +200°F | 2.75 lb | ASTM D 2000 SAE J200 1BC 810 MIL R 3065 SC 810 |
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
