Nitrile is the polymer of choice for applications requiring oil and solvent resistance. Nitrile has very good oil and gasoline resistance, superior resistance to petroleum-based hydraulic fluids, a wide range of service temperatures, good resistance to hydrocarbon solvents, and very good resistance to alkalis and acids.
This offering represents a synthetic polyisoprene which does not contain protein, which can cause allergic reactions in some cases. All materials are made with FDA approved ingredients per 21CFR 177.2600. Light Tan in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 2600 | 600 | -40°F to +160°F | 1.91 lb | ASTM D 2000 2AA 4425 A13 F17 |
This material does not contain protein, which may cause alergic reactions.
All materials are made with FDA approved ingredients per 21CFR 177.2600
*Physicals presented are typical values.
This Natural Rubber material is supplied with a .062” layer of 60 durometer black Neoprene vulcanized to one side. This compound has been designed to bond to most substrates. Apply your adhesive to the side with the black neoprene layer. The black layer is also useful as a wear indicator. We recommend that you thoroughly test the material with your adhesive before using this material in any application. All adhesives vary to some degree and each adhesive will react differently with any rubber compound. Tear Resistance (Die C) = 200 PPI. Red in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/8 - 1/2 | 36, 48 | 3200 | 650 | -40°F to +160°F | 2.03 lb | ASTM D 2000 4AA 430 A13 B13 F17 G21 |
Light Tan Pure Gum Floating stock has superior resilience, tensile, elongation and abrasion resistance properties. Light Tan Natural Rubber is produced entirely with FDA approved ingredients per 21CFR 177.2600. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases, and most hydrocarbons. Non-marking and non-toxic. Light Tan in color. Also available in Black.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/16 - 1/2 | 36, 48 | 3200 | 650 | -40°F to +160°F | 1.91 lb | ASTM D 2000 2AA 430 A13 F17 |
All materials are made with FDA approved ingredients per 21CFR 177.2600
*Physicals presented are typical values.
In addition to our Light Tan Natural Rubber, our Black Natural Rubber offering exhibits extremely good resiliency and abrasion resistance. It has good tear strength and is resistant to water, most salts and mild acids. Black in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 3200 | 650 | -40°F to +160°F | 1.91 lb | ASTM D 2000 2AA 430 A13 F17 |
| 50 | 1/64 - 1/4 | 36, 48 | 2700 | 550 | -40°F to +160°F | 2.07 lb | ASTM D 2000 2AA 525 A13 F17 |
| 60 | 1/64 - 1/4 | 36, 48 | 2700 | 500 | -40°F to +160°F | 2.28 lb | ASTM D 2000 2AA 625 A13 F17 |
Tuff-Stuff® Natural Rubber is an outstanding abrasion resistant material. Tuff-Stuff® delivers an optimum combination of tear, abrasion, noise, and impact resistance resulting in reduced maintenance costs and longer service life from capital equipment. Tuff-Stuff® and Tuff-Stuff Plus® have each been specifically formulated and field proven to deliver the ultimate in durability and long life for high production mineral and aggregate facilities. Tear Resistance (Die C) = 200 PPI. Red in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/8 - 2 | 36, 48 | 3200 | 600 | -40°F to +160°F | 1.93 lb | ASTM D 2000 4AA 432 F17 G21 |
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
