EPDM provides superior properties for outdoor and high temperature applications. EPDM has excellent resistance to heat, ozone and sunlight and good resistance to alkalis, acids and oxygenated solvents. Very good temperature flexibility, superior resistance to water and steam. It is highly extendible and is sulfur and peroxide curable.
An EPDM best suited for applications where a high performance rating is required.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 1100 | 400 | -50°F to +225°F | 2.03 lb | ASTM D 2000 5BA 410 C12 F17 |
| 50 | 1/64 - 1/4 | 36, 48 | 1200 | 350 | -50°F to +225°F | 2.2 lb | ASTM D 2000 5BA 510 C12 F17 |
| 60 | 1/64 - 1/4 | 36, 48 | 1300 | 350 | -50°F to +225°F | 2.22 lb | ASTM D 2000 5BA 610 C12 F17 |
| 70 | 1/64 - 1/4 | 36, 48 | 1300 | 250 | -50°F to +225°F | 2.28 lb | ASTM D 2000 5BA 710 C12 F17 |
| 80 | 1/64 - 1/4 | 36, 48 | 1550 | 200 | -50°F to +225°F | 2.28 lb | ASTM D 2000 5BA 815 C12 F17 |
Commercial blend EPDM is the most economical EPDM sheet offered. Intended to be used in less critical applications where temperatures are of an intermittent nature.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/16 - 1/4 | 36, 48 | 800 | 300 | -40°F to +212°F | 2.4 lb | ASTM D 2000 SAE J200 3BA 408 C12 MIL R-3065 RS 408 C12 |
| 50 | 1/16 - 1/4 | 36, 48 | 800 | 300 | -40°F to +212°F | 2.5 lb | ASTM D 2000 SAE J200 3BA 508 C12 MIL R-3065 RS 508 C12 |
| 60 | 1/16 - 1/4 | 36, 48 | 800 | 250 | -40°F to +212°F | 2.6 lb | ASTM D 2000 SAE J200 3BA 608 C12 MIL R-3065 RS 608 C12 |
| 70 | 1/16 - 1/4 | 36, 48 | 800 | 150 | -40°F to +212°F | 2.7 lb | ASTM D 2000 SAE J200 3BA 708 C12 MIL R-3065 RS 708 C12 |
Commercial blend EPDM is the most economical EPDM sheet offered. Intended to be used in less critical applications where temperatures are of an intermittent nature.
Finish: Matte Finish on One Side
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 1550 | 550 | -55°F to +300°F | 2.13 lb | ASTM D 2000 4CA 415 A25 B35 C32 EA14 F19 |
| 50 | 1/64 - 1/4 | 36, 48 | 1600 | 400 | -55°F to +300°F | 2.1 lb | ASTM D 2000 4CA 515 A25 B35 C32 EA14 F19 |
| 60 | 1/64 - 1/4 | 36, 48 | 1800 | 350 | -55°F to +300°F | 2.15 lb | ASTM D 2000 4CA 615 A25 B35 C32 EA14 F19 |
| 70 | 1/64 - 1/4 | 36, 48 | 1700 | 250 | -55°F to +300°F | 2.2 lb | ASTM D 2000 4CA 715 A25 B35 C32 EA14 F19 |
| 80 | 1/64 - 1/4 | 36, 48 | 1800 | 200 | -55°F to +300°F | 2.32 lb | ASTM D 2000 4CA 815 A25 B35 C32 EA14 F19 |
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
