This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles that are intended to be used in contact with food.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 800 | 550 | -30°F to +220°F | 2.65 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
| 55 | 1/32 - 1/4 | 36, 48 | 1200 | 500 | -30°F to +220°F | 2.98 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
| 60 | 1/32 - 1/4 | 36, 48 | 1400 | 450 | -30°F to +220°F | 2.98 lb | FDA Approved Ingredients per 21 CFR 177.2600 |
This specially formulated sheet product line prevents the growth of bacteria, fungi, and yeasts while avoiding obstacles that organic biocides have posed in the past. This product can alleviate cleaning challenges in food-processing, medical, industrial, and other applications prone to microbial growth.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36 | 1600 | 550 | -50°F to +220°F | 2.44 lb | MIL-R-6855 CL2 GR40 MIL STD 810E Method 508.4 |
| 50 | 1/32 - 1/4 | 36 | 1200 | 500 | -30°F to +220°F | 2.98 lb | MIL-R-6855 CL2 GR40 NIL STD 810E Method 508.4 |
| 60 | 1/32 - 1/4 | 36 | 1400 | 450 | -30°F to +220°F | 2.98 lb | ASTM D 2000 2BC 615 A14 B14 C12 Z (Z = MIL STD 810E Method 508.4) |
A blended Neoprene compound with one or more polyester fabric plies, for service where dimensional stability is required. Suitable for use where moderate oil resistance is required and where hot and cold water and gases are being conveyed. Fabric content per thickness is one ply for 1/32” and 1/16”, two plies for 1/8”, three plies for 3/16”, and four plies for 1/4”.
Finish: Smooth
| Durometer Hardness † Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile PSI |
Ultimate Elongation Percent |
Fabric Weight |
Fabric Type |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Oil Resistance |
Specifications |
|---|---|---|---|---|---|---|---|---|---|---|
| 70 | 1/32 - 1/4 | 36, 48 | 600 | 250 | 4.0 oz | Cotton or Polyester |
-20°F to +180°F |
4.0 lb | Good | ASTM D 2000 4AA 430 A13 B13 F17 G21 |
*Physicals presented are typical values.
† Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet.
GAUGES: This construction includes one ply for each 1/16” thickness:
1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plie
Specifically designed for use with pressure sensitive adhesives (PSA). We supply the material talc-free: re-rolled in a polyethylene liner.
Finish: Matte Finish on one side
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 900 | 400 | -30°F to +200°F | 2.3 lb | ASTM D 2000 SAE J200 1BC 408 MIL-R-3065 SC 408 |
| 50 | 1/32 - 1/4 | 36 | 1100 | 350 | -30°F to +200°F | 2.6 lb | ASTM D 200 SAE J200 1BC 510 MIL-R-3065 SC 510 |
| 60 | 1/32 - 1/4 | 36, 72 | 1200 | 350 | -30°F to +200°F | 2.7 lb | ASTM D 2000 SAE J200 1BC 610 MIL-R-3065 SC 610 |
| 70 | 1/32 - 1/4 | 36 | 1200 | 250 | -30°F to +200°F | 2.7 lb | ASTM D 200 SAE J200 1BC 710 MIL-R-3065 SC 710 |
| 80 | 1/32 - 1/4 | 36 | 1200 | 150 | -30°F to +200°F | 2.8 lb | ASTM D 2000 SAE J200 1BC 810 MIL-R-3065 SC 810 |
*Physicals presented are typical values.
Another example of the extensive capabilities of our laboratory. This material is designed and formulated to meet the mass transit industry’s most demanding requirements and specifications for smoke generation (ASTM E 662), flame propogation (ASTM C 542), and toxic fume production (SMP 800-C). Rail transit, truck, bus or automotive, WARCO BILTRITE has the material to meet your requirements.
Finish: Nylon
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 65 | 1/32 - 1/4 | 36, 48 | 1500 | 500 | -30°F to +220°F | 2.98 lb | ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure), Bombardier SMP 800-C† Boeing BSS 7239, UL 94VO |
| 75 | 1/32 - 1/4 | 36, 48 | 1300 | 550 | -30°F to +220°F | 3.12 lb | ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure), Bombardier SMP 800-C† Boeing BSS 7239, UL 94VO |
*Physicals presented are typical values.
A Nitrile material designed specifically for the transformer oil market; helping to dissipate the likelihood of high electrostatic charging tendencies. These highly engineered materials, in addition to meeting their respective ASTM D 2000 line call-outs, meet industry specification GE A12C11E7.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 60 | 1/32 - 1/2 | 36, 48 | 2100 | 500 | -30°F to +250°F | 2.36 lb | ASTM D 2000 5BG 620 A14 B14 EO34; General Electric EA12C11E7 |
| 70 | 1/32 - 1/2 | 36, 48 | 2200 | 350 | -20°F to +250°F | 2.42 lb | ASTM D 2000 5BG 720 A14 B14 EO34; General Electric EA12C11E7 |
*Physicals presented are typical values.
Specially designed and developed for use in environments where alternative fuels are present. Immersion test results indicate that these materials are compatible with alternative fuels and are suitable for Bio-Diesel B20 (20% Bio-Diesel and 80% Petroleum Diesel) and Bio-Diesel B100 (100% Bio-Diesel).
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 60 | 1/32 - 1/2 | 36, 48 | 1500 | 300 | -30°F to +220°F | 2.39 lb | Compatible with Bio-Diesel B20 & B100 |
| 70 | 1/32 - 1/2 | 36, 48 | 1800 | 250 | -20°F to +220°F | 2.4 lb | Compatible with Bio-Diesel B20 & B100 |
*Physicals presented are typical values.
This offering represents a synthetic polyisoprene which does not contain protein, which can cause allergic reactions in some cases. All materials are made with FDA approved ingredients per 21CFR 177.2600. Light Tan in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/64 - 1/4 | 36, 48 | 2600 | 600 | -40°F to +160°F | 1.91 lb | ASTM D 2000 2AA 4425 A13 F17 |
This material does not contain protein, which may cause alergic reactions.
All materials are made with FDA approved ingredients per 21CFR 177.2600
*Physicals presented are typical values.
This Natural Rubber material is supplied with a .062” layer of 60 durometer black Neoprene vulcanized to one side. This compound has been designed to bond to most substrates. Apply your adhesive to the side with the black neoprene layer. The black layer is also useful as a wear indicator. We recommend that you thoroughly test the material with your adhesive before using this material in any application. All adhesives vary to some degree and each adhesive will react differently with any rubber compound. Tear Resistance (Die C) = 200 PPI. Red in color.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/8 - 1/2 | 36, 48 | 3200 | 650 | -40°F to +160°F | 2.03 lb | ASTM D 2000 4AA 430 A13 B13 F17 G21 |
*Physicals presented are typical values.
This material offering is designed for applications where food is present. This material is low volatile, peroxide-free and does not discolor over time. The ingredients used to make this product are listed in CFR 177.2600. This material is Ozone and UV resistant. Red in color. Also available in White.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile* PSI |
Ultimate Elongation* Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Specifications |
|---|---|---|---|---|---|---|---|
| 40 | 1/32 - 1/4 | 36, 48 | 650 | 350 | -65°F to +400°F | 2.18 lb | FDA approved ingredients per 21 CFR 177.2600 |
| 50 | 1/16 - 1/4 | 36, 48 | 650 | 250 | -65°F to +400°F | 2.54 lb | |
| 60 | 1/16 - 1/4 | 36, 48 | 650 | 200 | -65°F to +400°F | 2.67 lb | |
| 70 | 1/16 - 1/4 | 36, 48 | 650 | 150 | -65°F to +400°F | 2.75 lb | |
| 80 | 1/16 - 1/4 | 36, 48 | 700 | 150 | -65°F to +400°F | 2.77 lb |
*Physicals presented are typical values.
Designed for ventilating systems and for flange joints for water or brine systems to withstand 250 pounds of pressure. A typical application is a flange gasket in which the compression loads are so high that non-reinforced rubber would squeeze or extrude out between the flanges.
Finish: Smooth
| Class | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile PSI |
Ultimate Elongation Percent |
Fabric Weight |
Polymer | Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Oil Resistance |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 50 | 1/16 - 1/4 | 36, 48 | 3200 | 450 | 10.8 oz per sq yd |
SBR | -40°F to +200°F |
2.7 lb | N/A |
| 2 | 60 | 1/16 - 1/4 | 36, 48 | 1650 | 350 | 10.8 oz per sq yd |
Neoprene | -40°F to +200°F |
3.2 lb | Medium |
| 3 | 50 | 1/16 - 1/4 | 36, 48 | 1800 | 450 | 10.8 oz per sq yd |
SBR | -40°F to +200°F |
2.7 lb | N/A |
| 4 | 50 | 1/16 - 1/4 | 36, 48 | 1600 | 600 | 10.8 oz per sq yd |
NBR | -40°F to +200°F |
2.9 lb | High |
Each sheet has a ply of 10.8 oz./sq. yd. per each 1/16” gauge.
GAUGES: This construction includes one ply for each 1/16” thickness:
1/16” = 1 ply, 1/8” = 2 ply, 3/16” = 3 ply, 1/4” = 4 ply
*Physicals presented are typical values.
A fabric reinforced, oil resistant Neoprene blended sheet used to transmit motion between fluids. Premium components and superior properties for long service life. Makes an excellent weather stripping material. Should be carefully assessed for suitability to assure low permeability to the fluids or gases it will separate.
Finish: Smooth
| Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile PSI |
Ultimate Elongation Percent |
Fabric Weight |
Fabric Type |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
Oil Resistance |
Specifications |
|---|---|---|---|---|---|---|---|---|---|---|
| 70 | 1/16 - 1/4 | 48 | 900 | 300 | 8.5 oz | Polyester | -20°F to +180°F |
4.0 lb | Good | ASTM D 2000 1BC 709 |
*Physicals presented are typical values.
This expanded rubber product is designed with cushioning and lower weight in mind, while maintaining as much of the rugged durability of compounded rubber as possible.
Finish: Smooth. KleenRite texture also available.
| Density | Durometer Hardness Shore A ± 5 |
Thickness (Inches) |
Width (Inches) |
Tensile PSI |
Ultimate Elongation Percent |
Temperature Range |
Estimated Weight Per Linear Foot (1/8" x 36") |
|---|---|---|---|---|---|---|---|
| 0.637 | 30 | 1/4 - 1/2 | 36, 48 | 200 | 200 | -20°F to +140°F | 2.5 lb |
| 0.637 | 40 | 1/4 - 1/2 | 36, 48 | 200 | 200 | -20°F to +140°F | 2.6 lb |
| 0.637 | 50 | 1/4 - 1/2 | 36, 48 | 200 | 200 | -20°F to +140°F | 2.9 lb |
RotoCell® is a registered trademark of West American Rubber Company, LLC. All rights reserved.
*Physicals presented are typical values.
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents Copyright © West American Rubber Company, LLC 2007-2010. All rights reserved. View our Privacy Policy
