› HOME
› PRODUCTS
› SHEET RUBBER
› Specification Grade
› Engineered Products
› Neoprene
› EPDM
› Nitrile (Buna-N)
› SBR
› Natural Rubber
› Viton®
› Fluoroelastomer
› Silicone
› Cloth Inserted (CI)
› Diaphragm
› Hypalon®
› Butyl
› Thermoplastic Elastomer
› Chute Lining & Skirtboard |
Silicone rubber can withstand a wider range of temperature extremes than nearly all other elastomers, remaining viable from -75°F to +500°F. Silicone has excellent tensile strength, elongation, tear strength, compression set and high temperature properties. Silicone can withstand many extreme environments and is inherently a fungus resistant material. It can resist water and many chemicals, including some acids, oxidizing chemicals and ammonia. |
|
| |
ENGINEERED SILICONE SHEET RUBBER: |
| |
FDA Silicone |
This material offering is designed for applications where food is present. This material is low volatile, peroxide-free and does not discolor over time. The ingredients used to make this product are listed in CFR 177.2600. This material is Ozone and UV resistant. Red in color. Also available in White. |
Temperature: -65°F to +400°F Finish: Smooth |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile
PSI |
Ultimate
Elongation
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Specifications |
40 |
1/32 - 1/4 |
36, 48 |
650 |
350 |
-65°F to +400°F |
2.18 lb |
FDA approved
ingredients per
21 CFR 177.2600 |
50 |
1/16 - 1/4 |
36, 48 |
650 |
250 |
-65°F to +400°F |
2.54 lb |
60 |
1/16 - 1/4 |
36, 48 |
650 |
200 |
-65°F to +400°F |
2.67 lb |
70 |
1/16 - 1/4 |
36, 48 |
650 |
150 |
-65°F to +400°F |
2.75 lb |
80 |
1/16 - 1/4 |
36, 48 |
700 |
150 |
-65°F to +400°F |
2.77 lb |
|
|
|
|
| |
PERFORMANCE SILICONE SHEET RUBBER: |
| |
Specification Grade Silicone |
This product is designed to be used in applications where higher physical properties and lower compression set are required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. Red in Color. |
Finish: Smooth |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile
PSI |
Ultimate
Elongation
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Specifications |
40 |
1/32 - 1/4 |
36, 48* |
800 |
450 |
-65°F to +450°F |
2.48 lb |
A-A-59588 2A & 2B,
ZZ-R-765 2A & 2B,
AMS 3301,
ASTM D 2000 1GE 407 |
50 |
1/32 - 1/4 |
36, 48* |
800 |
350 |
-65°F to +450°F |
2.5 lb |
A-A-59588 2A & 2B,
ZZ-R-765 2A & 2B,
AMS 3302,
ASTM D 2000 1GE 507 |
60 |
1/32 - 1/4 |
36, 48* |
750 |
300 |
-65°F to +450°F |
2.67 lb |
A-A-59588 2A & 2B,
ZZ-R-765 2A & 2B,
AMS 3303,
ASTM D 2000 1GE 507 |
70 |
1/32 - 1/4 |
36, 48* |
750 |
250 |
-65°F to +450°F |
2.71 lb |
A-A-59588 2A & 2B,
ZZ-R-765 2A & 2B,
AMS 3304,
ASTM D 2000 1GE 507 |
|
|
* 72 inch width available upon request. |
COMSIL® Commercial Grade Silicone |
WARCO BILTRITE’s commercial grade silicone sheet is designed to be used in applications where physical properties are not critical but extreme temperature (high or low) resistance is still needed. This material also provides excellent UV and ozone resistance. It is non- toxic, chemically inert and fungus resistant.
Red in Color. Also available in Black, White, and Gray. |
Finish: Smooth |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile
PSI |
Ultimate
Elongation
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Features |
40 |
1/16 - 1/4 |
36, 48* |
600 |
450 |
-65°F to +400°F |
2.44 lb |
Available with
Pressure Sensitive
Adhesive (PSA) |
50 |
1/16 - 1/4 |
36, 48* |
600 |
350 |
-65°F to +400°F |
2.54 lb |
60 |
1/16 - 1/4 |
36, 48* |
600 |
300 |
-65°F to +400°F |
2.59 lb |
70 |
1/16 - 1/4 |
36, 48* |
550 |
250 |
-65°F to +400°F |
2.73 lb |
80 |
1/16 - 1/4 |
36, 48* |
500 |
150 |
-65°F to +400°F |
2.89 lb |
|
|
COMSIL® is a registered trademark of West American Rubber Company, LLC. All rights reserved.
* 72 inch width available upon request. |
|
