|
|
|
|
|
| |
|
|
| |
|
| |
SBR SHEET
|
› HOME
› PRODUCTS
› SHEET RUBBER
› Specification Grade
› Engineered Products
› Neoprene
› EPDM
› Nitrile (Buna-N)
› SBR
› Natural Rubber
› Viton®
› Fluoroelastomer
› Silicone
› Cloth Inserted (CI)
› Diaphragm
› Hypalon®
› Butyl
› Thermoplastic Elastomer
› Chute Lining & Skirtboard |
SBR is a copolymer of styrene and butadiene and has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength. The temperature range of SBR is -40˚F to 180˚F. SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications. |
| |
|
| |
|
| |
|
| |
PERFORMANCE SBR SHEET RUBBER: |
| |
High Grade SBR |
A premium grade SBR sheet with a high tensile strength. Well suited for the heating and plumbing trades. Has good aging, abrasion and tear resistant properties. Refer to physical properties and ASTM data in assessing suitability for intended applications. Black in color. |
Finish: Smooth |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile*
PSI |
Ultimate
Elongation*
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Specifications |
75 |
1/16 - 1/4 |
36, 48 |
900 |
160 |
-40°F to +180°F |
2.56 lb |
ASTM D 2000
1AA 709Z
(Z = 75 ± 5 Durometer) |
|
|
*Typical Values |
Mid-Grade SBR |
A mid-grade SBR with a higher tensile and better aging capacity than the economical Red Rubber. Red in color. |
Finish: Smooth |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile
PSI |
Ultimate
Elongation
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Specifications |
75 |
1/16 - 1/4 |
36, 48, 72 |
700 |
250 |
-20°F to +170°F |
3.2 lb |
ASTM D 1330 Grade 1
|
|
|
|
Red Rubber |
An economical red sheet for use in low pressure applications with no oil resistant requirements. Red in color. Also available in Black on a special order basis. |
Finish: Smooth - Also available in fabric finish upon request. |
Durometer
Hardness
Shore ± 5 |
Thickness
(Inches) |
Width
(Inches) |
Tensile
PSI |
Ultimate
Elongation
Percent |
Temperature
Range |
Estimated Weight
Per Linear Foot
(1/8" x 36") |
Specifications |
75 |
1/32 - 1/4 |
36, 48, 72 |
400 |
150 |
-40°F to +170°F |
3.5 lb |
ASTM D 1330 Grade 2
ASTM D 2000 1AA 704Z
(Z = 75 ± 5 Durometer)
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
| |
|
|
|
|
|
WEST AMERICAN RUBBER COMPANY, LLC | 1413 BRADEN COURT · ORANGE, CALIFORNIA 92868 | TEL: 714-532-3355 | sales@warco.com
BILTRITE RIPLEY OPERATIONS, LLC | P.O. Box 577 · RIPLEY, MISSISSIPPI | TEL: 800-245-8748 | biltritesales@warco.com |
An ISO 9001:2000 Certified Company
WARCO and BILTRITE logos and slogan are ® registered trademarks of West American Rubber Company, LLC
Contents © 2007 West American Rubber Company, LLC
|